Materials Videos

Featured Materials Videos

Video to Show How NeoSight Can Be Used on Coke Drums

With NeoSight, we apply our knowledge and expertise to the challenge of leveraging your data to maximize asset efficiency.

Graphene Based Coatings Designed for Active and Passive Corrosion Prevention

University at Buffalo chemists are using graphene, to develop new coatings for rust-proofing steel.

RETSCH TECHNOLOGY - Motorized Guidance Sheet for CAMSIZER P4

The patented Motorized Guidance Sheet for the RETSCH TECHNOLOGY CAMSIZER P4 was exclusively designed for special applications in order to preferentially orient the particles.

Planetary Ball Mill PM 100 - Introduction

The Retsch Planetary Ball Mill / Laboratory Mill Range meets and exceeds all requirements for fast and reproducible grinding down to the nano range.

Conductivity Sensors from IST AG

Introduction to Innovative Sensor Technology IST AG Conductivity Sensors.

Operating The BetterPyc 380 to Measure Solid Content

In this video tutorial, we brought you a comprehensive guide on how to use the BetterPyc 380 to measure the Density of materials with utmost ease.

Tango Near Infrared Spectrometer for Quality Control from Bruker

In this video, Dean Roberts, Manager-US Food, Feed and Agriculture Markets - Bruker demonstrates the working and application of Tango near Infrared spectrometer.

Laser Hardening with AL-ROCK - Video

Laser hardening is a process with which the wear behaviour of components can be specifically influenced.

Handheld LIBS Analyser for QA / QC Analysis

Vulcan is one of the fastest metals analysers that is built to last

Video Demonstration of a Versatile and Dynamic Test System - TA-ElectroForce 3200

Powered with TA-ElectroForce technology, the 3200 Test System is supported by industry leading performance, up to 300 Hz of frequency and the industry's only 10 Year Motor Warranty.

Leica Microsystems Ergonomy

In this video Wayne Buttermore, Central Regions Sales Manager at Leica Systems talks about the ergonomy of Leica cameras.

High Resolution Horizontal Dilatometers - DIL 830 Series - Video

The 830 Series is an ideal tool for R&D laboratories to measure the linear thermal expansion and to calculate the CTE of polymers, ceramics, glasses, building materials, high performance materials, metals and alloys with exceptional accuracy.

LightField 5 Software Introduction from Princeton Instruments

The future of scientific imaging and spectroscopy software is LightField!

Benchtop XRF - Shimadzu EDX-LE X-Ray Fluorescence System

Dan Davis from Shimadzu shows us their EDX-LE benchtop x-ray fluorescence (XRF) instrument. he shows us key features such as the sample positioning camera and runs a sample in real time for us.

VibroFlex QTec® - modular vibration measurement system reinventing vibrometry

VibroFlex QTec® is the optical vibration measurement solution, now enhanced with the patented technology QTec® for outstanding measurement data quality and best SNR when measuring dynamics, acoustics and vibrational behavior on engineered surfaces.

Large General Purpose Industrial Oven - LGP - CARBOLITE GERO

The LGP large general purpose ovens offer the greatest choice of options in size and maximum temperature. The range spans from 500 to more than 13,000 litres, with a temperature span from 250 °C to 700 °C.

Prompted Test Using the BlueHill Universal

Video to show a prompted test using the BlueHill Universal from Instron.

Vibratory Disc Mill RS 200 - Introductory Video

The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness.

Safety Improvements for Instron APPS LAB

In this video, we offer quick tips on how to safely use an Instron® universal testing system.

Video to Show How NeoSight Can Be Used for Floating Systems

NeoSight is an platform designed to leverage and supplement new or existing digitalization efforts with a primary goal to provide hindsight, insight and foresight into the performance and integrity of an asset, regardless of industry or application.

Retrofilling Distribution Transformers Case Studies

This video shows Retrofilling Distribution Transformers Case Studies.

Multi-Specimen Fatigue ElectroForce 3300 - Video Demonstration

Now available from TA Instruments is the best in multi-specimen fatigue testing in stent materials and more is the ElectroForce Series Multi-Specimen Fatigue system for the 3300 and 3200 load test frame systems.

Everything vibrates – VibroFlex as the new flexibility in optical vibration measurement

Wherever researchers, product developers and quality engineers measure acoustics, dynamics and vibration – VibroFlex laser vibration sensors from Polytec offer the precise, efficient and reliable analysis without contacting or influencing the sample.

GPS Synchronisation of a DL850 ScopeCorder

The GPS Synchronisation of a DL850 ScopeCorder - Event monitoring & precision timing from Yokogawa.

Esprix Technologies Corporate Video

This is the corporate video for Esprix Technologies.

Welcome To The Invisible World by Cavitar

Welcome To The Invisible World by Cavitar.... A world in which the unimaginable can be recorded on a camera thanks to our laser illumination. Where you get to see through heat and where brightness is no longer considered an obstacle. Where welding imaging is as clear as a day and welding defects can be identified with ease. Where shockwaves are captured with no motion blur. Where researchers, welders, and those with a curious mind can find something new and unique every single time.

LightField - Designed for Researchers

Learn how the powerful LightField software was designed with the demands of researchers in mind.

The Future of Graphene and 2D Materials

Oxford Instruments are experts in high technology systems and processes including CVD, ALD and PECVD.

Superior Pressure Sensors Improve Speed and Altitude Accuracy of UAVs

Superior Sensor Technology's ND Series pressure sensors offer advanced air measurement capability that greatly improve the speed and altitude control of drones or unmanned aerial vehicles (UAVs).

The Measurement of Melt Density Through Method A/B Testing

Let’s take a look at a specific use case for the LMI5500: the measurement of melt density through method A/B testing.

Video to Show a Compact Combination Checkweighter and Metal Detector - CW3

This video shows the new CW3 Compact Combination Checkweigher and Metal Detector: LOMA SYSTEMS.

Streamline Your Process: Thermo Scientific™ Process 16 Twin-Screw Extruder

Streamline your process with the  Process™ 16 Extruder. Listen to scientists about how the Process 16 Extruder helps to streamline the material development process.

CARBOLITE GERO High Pressure Sintering Furnace LHTG

High pressure sintering furnace up to 100 Bars and 3000°C

Vendor Managed Inventory

Vendor Managed Inventory – aka VMI – connects you and your vendors to your silo inventory.

Cut-off Machine QCUT 350 A

The QCUT 350 A is an automatic wet abrasive cut-off machine for samples up to max. Ø 135 mm. Due to its low contact cutting (lcc) function, it gently cuts different types of samples with various geometries, sizes and materials.

Video to Show Software Upgrades for Static-Hydraulic Testing

This video shows an upgrade path is now available for Partner Software users to move to the NEW Bluehill Universal platform.

CARBOLITE GERO EBO Chamber Furnace for Catalytic Debinding

The CARBOLITE GERO EBO debinding furnace is specially engineered to handle the stringent requirements that come with catalytic debinding.

The EM TIC 3X Milling System from Leica Microsystems

The EM TIC 3X Milling System surpasses conventional slope cutting instruments. It can mill at high rates, cut broad and deep into the sample, and create smooth surfaces resulting in high-quality cross-sections of almost any material, quickly and easily.

Video to Demonstrate an Electromagnetic Linear Motor

TA ElectroForce manufactures dynamic mechanical testing systems, used to characterize Medical Devices, Biologic, and Engineered materials.

Quality control with TopMap surface metrology - control your process with the QC Package

The QC Package for TopMap optical surface profilers offers smart quality control solutions for industrial precision manufacturing.

6D Non-Contact Surface Metrology for Aspheric Optics with 6-Axis Hexapod Motion System

THis is a video about 6D Non-Contact Surface Metrology for Aspheric Optics with 6-Axis Hexapod Motion System

QTec® multipath interferometry for fast and efficient vibration measurement

The patented QTec® laser technology reinvents laser vibration measurements by eliminating the root cause of noise, delivering superior optical sensitivity, and enabling high-fidelity measurements on all technical surfaces – whether rotating, moving or dark.

Rotating Tube Furnace RHZS - CARBOLITE GERO

The new rotating tube furnace RHZS allows for the work tube to be easily removed and replaced.

Heating Brass Inserts for Metal-to-Plastic Insertion with Induction

In this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.

LightField and PI-MAX4 ICCD Cameras

LightField and PI-MAX4 ICCD Cameras from Princeton Instruments

CARBOLITE GERO Soldering Brazing Furnace Range V-L

The CARBOLITE GERO V-L soldering and brazing furnace is suitable for generating the lowest achievable operation pressures. Due to this vacuum capability, the highest purity gas atmosphere can be achieved.

Detecting Stainless Contamination of Food Items - Video

This video shows X-ray Inspection - stainless steel contamination detection [tea bags in metallised foil].

Video to Show How Ingeo is Made

NatureWorks has become a world-leading biopolymers supplier and innovator with our portfolio of naturally advanced materials called Ingeo.

The Dimension Fastscan Atomic Force Microscope (AFM) from Bruker Nano

The Dimension Fastscan from Bruker is the fastest AFM on the market. John Thornton takes us for a tour of this instrument pointing out key features and runs a demonstration to illustrate how fast data can be collected. The speed of this instrument make it suited to rapid sampling across large samples and production environments where speed is critical.

High Temperature Oven with Modified Atmosphere - HTMA - CARBOLITE GERO

The HTMA series is a range of high temperature modified atmosphere ovens for use with inert atmospheres up to 700°C.

Investing in a Handheld XRF for Quality Assurance and Control

Hitachi customer stories: SCHMOLZ + BICKENBACH use the X-MET8000 handheld XRF for quality assurance and control.

Cutting Mill SM 300 - Features & Applications

The RETSCH Cutting Mill SM 300 is suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products.

Operating The BetterPyc 380 for Volume Calibration

In this video tutorial, we brought you a comprehensive guide on volume calibration using BetterPyc 380.

Inovenso's Electrospinning machine: NS Mini Pilot

Scale-up to the pilot line of Electrospinning with Inovenso's NS Mini Pilot.

Non-contact Vibration Measurement on Rotating Objects

The convenient and non-contact mapping of operational deflection shapes is a specialty of Polytec's Laser Scanning Vibrometers.

The Malvern Mastersizer 3000 Particle Size Analyzer

The Mastersizer 3000 from Malvern Panalytical replaces the Mastersizer 2000 particle size analyzer. Julie Chen gives us a run down on the new features and operation of the Mastersizer 3000.

FERGIE - Fluorescence Measurement Set-Up

Quickly set up a fluorescence measurement using the FERGIE spectroscopy system.

LightField The Power of Math with Princeton Instruments

LightField The Power of Math with Princeton Instruments.

Guide to Using Epoxy Film Adhesives

Learn how to properly apply adhesive film system FLM36 in this video presentation.

The Creation of a FUSION PTR-TOF 10k

Follow the creation of a FUSION PTR-TOF 10k, from an empty rack all the way through to being shipped.

Hot Water Compression TEst of Ingeo-Based High Heat Serviceware

Jointly developed between Northern Technologies International Corporation and NatureWorks, Natur‑Tec® BF3002HT is a platform of high-performance, biobased and compostable polymer resin compounds made with modified Ingeo PLA.

FERGIE Absorbance Experiment Setup

Learn how to setup a simple absorption experiment using the FERGIE spectrometer system with its flexible ecosystem of CUBES, accessories and software.

FERGIE Spectrograph- Fiber Coupling

Demonstrates several ways to connect optical fibers and fiber connector probes to the FERGIE spectrograph.

Lightweight Composite Interiors for Aerospace - Video

This video shows how TRB design, manufacture and deliver under Part 21, lightweight composite interiors for aerospace.

Pneumatic Side Action Grips - Offsettable Jaw Faces

Instron’s 5 and 10 kN pneumatic side-action grips feature offsetable jaw faces which can be used to perform tests such as lap-shear.

Video to Demonstate a Durapulse SGT Stent/Graft Tester

The NEW DuraPulse™ Stent/Graft test (SGT) instrument extends the performance and reliability that ElectroForce SGTs have become known for over the past 20 years.

Optical Emission Spectrometer (OES) - FOUNDRY-MASTER

To find out more about FOUNDRY-MASTER Optical Emission Spectrometer (OES) visit https://hha.hitachi-hightech.com/en/product-range/products/optical-emission-spectrometers/desktop-benchtop-floorstanding-oes

Size and Shape Particle Analyzer - Video of Microtrac MRB's Sync

Microtrac MRB’s synchronous size and shape analyzer, Sync, integrates the world’s leading laser diffraction technology with the world’s leading dynamic image analysis technology.

VLOG: Optical 3D measurement of cutting tools

In our 5th Vlog Urban Muraus and Sandra Bergmann are discussing how Bruker Alicona is solving different measurement tasks on cutting tools. Learn more about edge preparation, surface finish and the overall geometry. ��Learn more about: http://www.alicona.com https://www.alicona.com/products/edge... https://www.alicona.com/products/edge...

Reflected Light Image Registration from HORIBA Scientific

This video from HORIBA Scientific shows the Raman image and the corresponding reflected light image of Si test structure.

The AFM+ from Anasys Instruments

Roshan Shetty from Anasys Instruments shows us their new AFM+ platform. This new development has been designed as a modular entry level instrument that combines an atomic force microscope and thermal analysis capabilities. It has been designed so that it can be upgraded to their NanoIR spec at a later date.

CARBOLITE GERO CRI Coke Reactivity Furnace and CSR

The Carbolite Gero Coke Reactivity Index furnace (CRI) determines lump-coke reactivity in carbon dioxide gas at elevated temperatures.

DynaPro Plate Reader III – Automated Biopharmaceutical and Nanoparticle Characterization

DynaPro Plate Reader III – Automated Biopharmaceutical and Nanoparticle Characterization

Particle Analysis with the CAMSIZER® P4 – Retsch Technology

The CAMSIZER P4 particle analyzer has been developed to comprehensively characterize dry, free-flowing bulk materials.

Heart Valve Durability Tester - DuraPulse™ Video

Powered with ElectroForce Technology, the DuraPulse™ system can be configured to support two, four, or six simultaneous and separate tests at once, while maintaining the highest quality in control and data!

Atomic Scale Processing Solutions

Atomic Scale Processing Solutions from Oxford Instruments Plasma Technology. Clustering multiple processing modules into one system enables unique solutions on a single vacuum transfer.

PicoSpin 45 NMR Spectrometer from Thermo Scientific at Pittcon 2013

In this video Simon Nunn, Global Marketing Director for Molecular Spectroscopy introduces Thermo Scientific PicoSpin 45 at Pittcon 2013.

Discover Growth Techniques of Sapphire

Discover the growth techniques of sapphire.

Video of Production Systems with Integrated Mixing and Dispensing Solutions

RAMPF develops production systems with integrated mixing and dispensing solutions for the casting, sealing, and bonding of various polymers.

Video of Dover Motion's Automated Fluorescence Filter Wheel

Originally developed for a Gene Sequencing Motion Core, Dover Motion's rotary filter wheel can be used for many different applications for Automated Fluorescence Microscopy.

Reliable Handheld XRF Analyser - X-MET8000

Fast screening for heavy metals, dramatically reduce the need for laboratory analyses. Easy to use in harshest environments and weather conditions.

The Aqualog Simultaneous Absorbance and Fluorescence EEMS from HORIBA

Adam Gilmore from HORIBA shows us their all new, first to market Aqualog, simultaneous absorbance and fluorescence EEMS (excitation emission matrices) system. It uses a CCD as the detector making it 100 time faster than other instruments. This means that measurements that may have taken several minutes can now be completed in just seconds.

Video to Show Cladding with a Mobile Laser System

Cladding with metal powder is ideal for the repair of big surfaces because defined and large areas can be built up quickly and efficiently.

Video to Show the Range of X5 X-Ray Inspection Equipment from LOMA SYSTEMS

This video shows the latest range of X-Ray Inspection equipment from LOMA SYSTEMS.

CAMSIZER X2 - RETSCH TECHNOLOGY - Short Introduction

The quality control of fine powders can be substantially improved with the new CAMSIZER X2: More precise and faster analysis of particle size and particle shape helps to improve the product quality, reduce rejects and save labor costs, energy and raw materials.

Expert Geo Geochemistry Handheld XRF Analyser - X-MET8000

X-MET8000 Expert Geo geochemistry handheld XRF analyser for rapid, on-site environmental soil and sediment testing.

Demonstration of the XploRA Raman System from HORIBA

Vincent Larat from HORIBA explains how the XploRA Raman spectrometer works and provides us with a real time demonstration of how the system works.

Tensile Tests on Plastics with MakroXtens - Zwick Roell

Zwick Roell Video: Tensile tests on plastics to ISO 527 with makroXtens extensometer

Pneumatic Side Action Grips - Adjustable Opening

Instron’s 1, 2, 5, and 10 kN pneumatic side-action grips feature adjustable jaw face openings which can be set to the thickness of the specimen, increasing safety by preventing fingers from being inserted.

Latest Spectroscopy Products from HORIBA Scientific

This video shows the interview with Daniel Meyer, Sales Manager at HORIBA Scientific.

Pneumatic Side Action Grips - Quick Release Hose

Instron’s pneumatic side-action grips can be changed in and out easily by using a quick-release hose.

A Complete Range of Metals Analysers for QA/QC from Hitachi High-Tech Analytical Science

Read the metal. Reveal the quality. When it comes to quality assurance and control, we’ve got you covered with our analysers. Watch this video to see Hitachi High-Tech Analytical Science's products in action.

LAQUATwin B-712 Pocket pH Meter from HORIBA

This video shows the LAQUAtwin B-712 Pocket pH meter from HORIBA. It is a waterproof pH meter with a large LCD display.

Basic principles of laser Doppler vibrometry

Laser vibrometry or more specific laser Doppler vibrometry is a precision optical measurement technology used for determining vibrational velocity and displacement at a fixed point

XRD-Mill McCrone - Handling video

The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D.

Particle X-Plorer Software Module - RETSCH TECHNOLOGY

The RETSCH TECHNOLOGY software module Particle X-Plorer is used in both our particle analysis systems CAMSIZER P4 and CAMSIZER X2 and offers the user a wealth of features and possibilities to obtain in-depth knowledge of his sample.

Video of the GOM CT Scanner

This video shows the capabilities of the GOM CT Scanner.

The Nexsa G2 System

The Nexsa G2 System

TRITOP Photogrammetry & ATOS Triple Scan 3D Scanner - Video Timelapse

This video shows a timelapse of TRITOP Photogrammetry & ATOS Triple Scan 3D Scanner.

Aerospace Capabilities of Stress Engineering Services

Stress Engineering Services provides clients in high-tech industries like Aerospace with the expert services they need to ensure excellence in areas such as Design, Analysis, Testing, Materials and Avionics

Video Introduction to the Metal Detector IQ4

Introduction of the IQ4 metal detection range from Loma Systems.

Adding Fluorescence to a Conventional Stereo Microscope

The NIGHTSEA Model SFA Stereo Microscope Fluorescence Adapter is an easy, economical way to add fluorescence viewing capability to virtually any stereo microscope, regardless of make, model, or age.

Mixer Mill MM 400 - Introductory Video

The mixer mill MM 400 is a compact versatile bench-top unit for dry, wet and cryogenic grinding of small amounts of sample.

A Guide to MIDEL

This video shows MIDEL and what their company can do.

Reliable Handheld LIBS Analyser - Vulcan

To find out more about Vulcan LIBS Analyser visit https://hha.hitachi-hightech.com/en/product-range/products/handheld-xrf-libs-analysers/handheld-libs-analysers

High Energy Ball Mill Emax - Retsch

The High Energy Ball Mill Emax is an entirely new type of laboratory ball mill, especially developed for high energy milling.

SZ-100 Nanoparticle Size Analyzer from HORIBA

Mark Bumiller from Horiba shows us their latest addition, the SZ-100, nanoparticle size analyzer/characterization system. It is suited to analyzing particles in the sub-micron range. The SZ-100 uses dynamic light scattering (DLS) technology to look at brownian motion to measure particle size.

XPS Overview with Robert Palgrave of UCL

Mr. Palgrave of University College London goes over analyzing solid-state and thin film materials using XPS!

Thermo Scientific ARL iSpark Plus OES Metal Analyzer – Taking Speed and Stability to the Next Level

Thermo Fisher Scientific proudly presents the ARL iSpark Plus metal analyzer, the next generation of the trusted standard in spark optical emission spectrometry streamlining your laboratory workflow by taking speed and stability to the next level.

Video of a Miniature Linear Stage - The Dover KV™

The Dover KV™ linear slide is a miniature linear stage with anti-backlash lead screws, 10 mm to 200 mm travel, and a standard NEMA 17-frame stepper motor.

Brillant 240 - Semi-Automatic Cut-Off Machine

The Brillant 240 is a compact and flexible semi-automatic abrasive cut-off machine with a 254 mm/10” cut-off wheel for workpieces or samples up to Ø 95 mm.

Bettersizer ST Overview | Laser Particle Size Analyzer for QC

The Bettersizer ST is a laser diffraction particle size analyzer design to ensure the quality (QC) of your final products and to improve your production efficiency. It is equipped with Bettersize patented DLOS (Dual Lens Optical System) technology that allows it to measure particles from 0.1 to 1000 µm with excellent repeatability.

The Emerging Field of Gene Therapy with Adeno-Associated Viruses

In this video interview, Arnaud Delobel, the R&D and Innovation Director at Quality Assistance talks to AZoM about the emerging field of gene therapy with adeno-associated viruses (AAV).

A Handheld X-Ray Fluorescence Analyzer for a Competitive Advantage in Composition Analysis

AVID invested in the X-MET8000 Expert handheld X-ray fluorescence analyser (XRF) from Hitachi High-Tech to make the composition analysis of their products efficient and reliable.

Digital Printing Capability for Food Serviceware

See Box has applied the latest in Swiss digital printing technology to their Riiqi Cup brand of Ingeo cups to provide a new level of vibrant graphics, and eliminate the need for minimum order quantities.

The ICAP-Q ICPMS from Thermo Scientific

The ICAP-Q ICPMS from Thermo Scientific is a new instrument that has been designed from the ground up that not only provides ease of use, but also easy maintenance. While the software interface makes the instrument easy to drive other features such as the redesigned Q-Cell collision cell help increase productivity by a factor of 2 over other ICPMS systems as well as improving sensitivity by 3 to 4 times.

BioMEMS Process Solutions

Oxford Instruments Plasma Technology collaborates with Southampton University to provide solutions for cutting edge research into BioMEMS.

XTrace Micro-Spot X-Ray Source from Bruker

In this video Stephan Boehm, Project Manager, Micro-XRF for SEM, Bruker Nano talks about the XTrace Micro-Spot X-Ray Source.

Pre-Configured Method Templates for the BlueHill Universal

This video shows the pre-configured method templates for the BlueHill Universal from Instron.

OES Analyser - PMI-MASTER Smart

This video shows the OES Analyser - PMI-MASTER Smart.

Video to Show a High Temperature Laser Flash Diffusivity System - DLF 1600

Featuring a laser 40% more powerful than any other on the market, 5 position carousel for accurate and precise heat capacity measurements, the DLF 1600 is the best performing high temperature laser flash diffusivity system available.

Video Demonstration of the DMA 3200

This video demonstrates the capabilites of the DMA 3200.

Webinar on Dynamic Light Scattering Size Data

This video from HORIBA shows a brief presentation on how to understand dynamic light scattering data for particle size.

Princeton Instruments' LightField Software - Setup, Acquire, Analyze and Export

The video describes how LightField software helps you set up your experiment, acquire images and spectra, and review, analyze and export your data.

Flow Sensors from IST AG

Introduction to Innovative Sensor Technology IST AG Flow Sensors.

Inovenso's Electrospinning machine: NS Mini Pilot

Scale-up to the pilot line of Electrospinning with Inovenso's NS Mini Pilot.

The Advantages of Continuous Electrode Slurry Processing

The Advantages of Continuous Electrode Slurry Processing

Solving Materials Problems with XPS

In this video Professor John Watts goes over how to solve materials problems with XPS.

Air Jet Sieve AS 200 Jet

The Air Jet Sieving Machine AS 200 jet is particularly suitable for sieve cuts of powdered materials which require efficient dispersion and desagglomeration.

Microreactor with Integrated Mass Spectrometer for Catalysis Studies | The CATLAB | Hiden Analytical

The Hiden CATLAB is a catalyst characterisation and microreactor system designed to make the analysis of catalysts rapid and simple.

Biosensors from IST AG

Introduction to Innovative Sensor Technology IST AG Biosensors.

A Video Introduction to Optical Emission Spectroscopy (OES)

This video from Hitachi High-Tech Analytical Science explains X-ray Fluorescence (XRF).

Streamline Your Processs: HAAKE™ PolyLab™ Torque Rheometer

Discover key aspects of the HAAKE™ PolyLab™ torque rheometer

CAMSIZER P4 - RETSCH TECHNOLOGY - Short Introduction

The CAMSIZER P4 particle analyzer has been developed to comprehensively characterize dry, free flowing bulk materials.

Pneumatic Side Action Grips - Alignment Device

Instron’s pneumatic side action grips feature optional specimen alignment devices which increase repeatability by helping operators load the specimen in the center of the grips.

Video Introduction to the TacticID-1064

The TacticID-1064 is the newest addition to B&W Tek’s family of handheld Raman analyzers, designed for safety personnel and first responders facing new and emerging threats.

Knife Mill GRINDOMIX GM 300 - Introductory Video

The knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.

Pneumatic Side Action Grips - 2712-04x

Instron’s pneumatic side action grips have several key features to help you improve your lab’s productivity, repeatability, ease-of-use, and operator safety.

Particle Detective: Hunting for Clues in Soy Milk

Join Viola and Ricky as they hunt for clues to smoother texture of soy milk in this fascinating video.

Why Exhibit at Pittcon 2014?

Pittcon is the leading showcase for scientific and technical innovation, with a singular focus on laboratory science. From 90 countries, thousands of conferees visit Pittcon each year to evaluate new technologies and products, form valuable business connections and formulate purchase decisions.

Temperature Sensors and Fast Response Time from IST AG

Introduction to Innovative Sensor Technology IST AG Temperature Sensores - Fast Response Time.

PTS TQM - A Customer Story from Hitachi High-Tech Analytical Science

This video details a customer story of PTS TQM with Hitachi High-Tech Analytical Science.

Pharmaceutical Content Uniformity with the QTRam

The QTRam transmission Raman spectrometer from B&W Tek allows pharmaceutical companies to build and run quantitative models that can quickly and easily perform content uniformity measurements.

Vertical Motion Z Stage - The Dover ZE™

The Dover ZE™ Stage is a vertical motion Z stage that uses a Z wedge setup drive by either step or servo motor for accurate positioning.

Chemical Characterization of Gas-phase and Condensed Organics

This video looks at the chemical characterization of gas-phase and condensed organics.

AXIS Supra (XPS) surface analysis

Based on patented AXIS technology the AXIS Supra for surface analysis is an instrument with unrivalled spectroscopic and imaging performance.

Plansee in the Thin Film Industry

Molybdenum and tungsten are two extraordinary metals that make a significant contribution to our modern lives today. We are in constant contact with these two materials without even being aware of it.

What is Gas Displacement Method? Calculating the True Density of Materials?

In this video, we explained the gas displacement method to measure the true density of materials. Also, we discussed the factors that should be considered when selecting the appropriate analysis gas for gas displacement methods, such as measurement precision, cost, and chemical stability.

Off-Gas Monitoring in Fermentations with Prima Mass Spectrometers

Maximize product yield and increase profits with the Thermo Scientific™ Prima PRO Process Mass Spectrometer. This online mass spectrometer & process gas analyzer is engineered to meet a number of challenging process applications in the petrochemical, iron and steel, and biotechnology industries.

Märzhäuser Wetzlar - EMC 2012

Märzhäuser Wetzlar - EMC 2012 - Run Time - 2:58mins

Tensile Tests on Metals with Makroxtens - Zwick Roell

Zwick Roiell video on Tensile tests on metals with Makroxtens

Synthetic Ester 7131 - MIDEL

This video shows MIDEL's synthetic ester 7131.

The CETR-Apex Nanomechanical Testing System form Bruker Nano

Bruker's CETR-Apex system is a nanomechanical testing system that features easily interchangeable heads allowing it to be able to used as a nano or micro indentation system as well as micro and nano scratch. Denis Koosau from Bruker shows us how easy it is to change a test head in this short video.

Particle Analysis of Spray Dried Powders - CAMSIZER X2

Particle size analysis of spray dried powders in the RETSCH TECHNOLOGY CAMSIZER X2.

Optical Surface Metrology - See more details

With the TopMap Micro.View and Micro.View+, the TopMap family is once more extended. Learn why you should opt for our surface metrology systems.

Nicolet iS50 FTIR Spectrometer from Thermo Scientific at Pittcon 2013

In this video Simon Nunn, Global Marketing Director for Molecular Spectroscopy Thermo Scientific talks about the Nicolet iS50 FT-IR.

BetterPyc 380 | Versatile Gas Pycnometer

Introducing BetterPyc 380, the advanced gas pycnometer designed for researchers and quality controllers to achieve highly accurate measurements of true density, volume solid content, and open cell content with up to 4-digit accuracy, offering precision at its best.

PICOSUN® Morpher - the new ALD production platform for up to 200 mm wafer markets

The PICOSUN™ Morpher ALD product platform is designed to disrupt the up to 200 mm wafer industries in Beyond and More than Moore technologies.

Should You Choose a LIBS Analyzer or a Handheld XRF?

Watch our latest video to find out when you should be choosing a LIBS analyzer over handheld XRF. Hitachi makes it really simple for you.

Humidity Sensors and Modules from IST AG

Introduction to Innovative Sensor Technology IST AG Humidity Sensors and Modules.

Explore SmartSwap™ for the Discovery Hybrid Rheometer

Get more information on this exciting feature at www.tainstruments.com TA Instruments proudly introduces you to SmartSwap™, an exciting feature on every Discovery Hybrid Rheometer! This excellent intelligent technology instantly recognizes geometries and sets parameters in your Trios Software. SmartSwap™ allows a quick and easy transition between any of our SmartSwap™ environmental systems and geometries that takes only seconds! SmartSwap™ is just one of many features that makes Discovery Hybrid Rheometers versatile and user-friendly. What else will you do with your rheometer today?

Ovens and Furnaces up to 3000 °C from CARBOLITE GERO

This video details the capabilities of CARBOLITE GERO and their ovens and furnaces.

Particle Characterization by Static and Dynamic Image Analysis by HORIBA

Mark Bumiller from HORIBA Particle Products introduces us to some particle characterization by static and dynamic image analysis and the HORIBA PSA300 and Camsizer. These instruments calculate particle size and shape distributions.

Walnut Shell Grit for Non-Skid Coatings from Composition Materials

This video shows how to apply walnut shell grit for non-skid coatings from Composition Materials.

A Video Introduction to Laser Induced Breakdown Spectroscopy (LIBS)

In this video, Mikko Järvikivi, LIBS Product Manager at Hitachi High-Tech Analytical Science, explains what Laser Induced Breakdown Spectroscopy is.

Temperature Sensors with Directly Welded Wires from IST AG

Introduction to Innovative Sensor Technology IST AG Directly Welded Wires.

Video of High Capacity Linear Stage - Dover Motion XYL™ Series

The Dover Motion XYL™ Series High Capacity Linear Stage is a large payload capacity, crossed roller table. This platform has extended XY travel up to 685 mm which allow it to handle 450 mm wafers.

BeDensi T Pro Series | Tapped Density Tester with a Wallet-Friendly Solution

The BeDensi T Pro Series is a reliable tapped density tester designed by Bettersize. It excels at intuitive operation while complying with the USP, EP, ASTM, and ISO.

X-MET8000 XRF Analyser - For Planning, Grade Control and Mining Exploration

To find out more about X-MET8000 visit https://hha.hitachi-hightech.com/en/product-range/products/handheld-xrf-libs-analysers/handheld-xrf-analysers

CryoMill

The CryoMill is a lab mill tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process.

ELTRA - Elemental Analyzers

ELTRA is one of the world's leading manufacturers of elemental analyzers for rapid and accurate analysis of solid materials. Our elemental analyzers provide tailor-made solutions for a wide range of samples and concentrations. Thousands of satisfied customers worldwide are proof of the quality and reliability of ELTRA analyzers.

A Guide to Fluids for Transmission and Distribution Applications

MIDEL fluids are designed to safeguard a wide range of power transmission and distribution applications.

Intellical Spectroscopy Calibration Made Easy from Princeton Instruments

Princeton Instruments patented IntelliCal® is the industry’s only easy-to-use wavelength and intensity calibration system.

Pellet Press PP 35 - RETSCH Laboratory Equipment

The Pellet Press PP 35 produces solid, high-quality pellets with a smooth surface, an important precondition for reliable and meaningful XRF analysis.

Fast and Easy to Use Benchtop XRF Analyser - LAB-X5000

To find out more about LAB- X5000 visit https://hha.hitachi-hightech.com/en/product-range/products/benchtop-xrf-analysers/benchtop-bulk-analysis-xrf-analysers

A Video to Show 50 Years of XPS

This video from Thermo Fisher Scientific – X-Ray Photoelectron Spectroscopy (XPS) details how XPS has impacted materials science research over the last 50 years.

Universal Testing Systems Video - 3400 Series

The 3400 Series Universal Testing Machines range in capacity from 500 N to 50 kN and are designed to meet all of your force testing needs.

Microstructure Characterization

This video introduces the easy way to measure 3D dynamics and topography for microstructure characterization.

Heating Brass Inserts for Metal-to-Plastic Insertion with Induction

In this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.

Video to Show ElectroPuls Simulation

This video demonstrates ElectroPuls simulation from Instron.

Acoustic Quality Control with Laser Precision

The new IVS-500 Industrial Vibration Sensor is the key to fast acoustic quality inspection, structure-borne noise analysis and reliable pass-fail decisions.

Analyzing Nitrogen at Low Detection Limits

Köster und Co. GmbH invested in a spark spectrometer from Hitachi to cross-check products and ensure quality.

Intelligent Automated 3D Scanner for Quality Control

This video shows intelligent automated 3D scanner for quality control.

TRB's Battery Enclosure for EV Vehicles

This video discusses TRB's Battery Enclosure for EV Vehicles

TRB's unique manufacturing process enables fibre to composite part in minutes

This video describes TRB's unique manufacturing process which enables fibre to composite part in minutes

Motor Replacement of the AD 350 V600 - Video

This video shows a motor replacement of the AD 350 V600.

Mortar Grinder RM 200 – Introduction

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness.

Rampf Group Corporate Video

The RAMPF Group stands for engineering and chemical solutions and caters to the economic and ecological needs of industry.

How to Measure the Tapped Density and Calculate the Compressibility with The PowderPro A1

In this video, Shelly Zhang from Bettersize instrument teaches you how to measure the tapped density using a fixed volumetric method and calculate the compressibility of powder materials with an automatic powder characteristics tester: PowderPro A1.

Video to show TA Instruments' Vertical Dilatometer Series - DIL 820

For the absolute best in sintering studies, look no further than the DIL820 Vertical Dilatometer series.

Oxford Instruments Plasma Technology Customer Support

Oxford Instruments Plasma Technology is committed to providing comprehensive, flexible and reliable global customer support.

Bruker Nano Surfaces Tribology and Mechanical Testing Workshop at the University of Sheffield

On May 22nd 2013 - AZo.TV attended the Tribology and Mechanical Testing Workshop by Bruker Nano-Surfaces at the University of Sheffield. Taking part in workshops and seminars with such experts as Steve Shaffer, PhD - senior applications scientist.

Video to Show the Sensitive Calorimeter System - TAM IV

For over 30 years, scientists have trusted the high sensitivity calorimetric measurements of the TAM system. The tradition of excellence continues with the all-new TAM IV; the world’s most sensitive, versatile, and reliable calorimeter from TA Instruments.

Setting Up a Metal Detection Device - Video

This video shows the ease of setting up the IQ4 metal detection device from LOMA Systems.

Portable Raman for Mineral Identification at the Sterling Hill Mining Museum

In this video, President & Executive Director Bill Kroth & Resident Geologist Earl Verbeek talks about how they are implementing the use of portable Raman spectroscopy to identify and verify minerals at this unique location.

Video of Motor Linear Actuator - Dover MAG Servo

The Dover MAG Servo Motor Linear Actuator is a compact, high-performance, direct drive table suitable for use in a wide range of applications.

FERGIE Raman in less than 90 seconds

Watch how simply and quickly you can set up a Raman experiment with FERGIE and its CUBES and accessories.

Particle Detective: Hunting for Clues in Chocolate

Join Viola in this Christmas special video as she helps chocolate-holic Melo solve his chocolate challenges: At what temperature does chocolate melt, and how should it be stored?

Filter Change of the V600 and AD 350 - Video

This video shows a filter change of the V600 and AD 350.

Introductory Video Vibratory Sieve Shaker AS 200 control

The analytical sieve shaker AS 200 is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring.

30 Years of Niton Handheld XRF Analyzers

In 2024 we celebrate 30 years of innovation & experience with Niton Handheld XRF Analyzers. From the first single-piece portable XRF analyzer in 1994 to our full range of Niton analyzers today, we continue to push technology & capabilities further.

Video to Show a Realtime Fatigue Monitoring System

An brief overview perspective of Stress Engineering's Realtime Fatigue Monitoring System (RFMS).

Technology in Action - Dr Philip Withers and His Xradia (Now Zeiss) VersaXRM - EPSRC

Dr Philip Withers Discusses the work conducted using his Xradia (Now Zeiss) VersaXRM at the University of Manchester.

RETSCH Company Video - Solutions in Milling & Sieving

With a tradition of more than 100 years of innovation, RETSCH is the global market leader in the preparation and characterization of solids. RETSCH stands for quality “made in Germany”. Learn more about the company and our products at http://www.retsch.com

Retrofilling - The Benefits

This video shows the benefits of retrofilling with MIDEL Safety Inside.

HBLED Applications and Systems: Enabling the Revolution of Solid State Lighting

Oxford Instruments Plasma Technology presents an evolution in Batch Etch technology. The HBLED industry justifiably demands high throughput, optimum device quality and low cost of ownership.

Tube Furnace Accessories for CARBOLITE GERO Tube Furnaces

CARBOLITE GERO is a leading tube furnace manufacturer. The video shows different options for our tube furnaces to create vacuum, inert gas and hydrogen atmospheres by the use of end seals.

Trace 1300 Series Gas Chromatographs from Thermo Scientific

Thermo Scientific have introduced the Trace 1300 Series gas chromatographs that incorporate breakthrough technology. Fausto Pigozzo shows us the new features including new injectors and detectors which help increase productivity and sensitivity with fast data acquisition in a more compact instrument.

PMI (Positive Material Identification) Testing with Analysers from Hitachi High-Tech Analytical Science

This video details the capabilities of Hitachi High-Tech Analytical Science's PMI (Positive Material Identification) testing with its analysers.

Video to Show Bruker’s scimaX

scimaX allows you to dramatically improve your productivity by operating round-the-clock by doing your ESI experiments during the day and acquiring MALDI imaging data when you go home.

Unlocking The Power Of Analysis - A Video from Hitachi High-Tech Analytical Science

This video details the capabilities of Hitachi High-Tech Analytical Science in helping you analyse your materials.

MALDI Molecular Imaging from Bruker

Katherine Kellersberg discusses MALDI Molecular Imaging within Bruker products at WMIC in Savannah.

Video of the Range of IQ4 Metal Detection Devices

This video shows the of the range of IQ4 metal detection devices available from LOMA SYSTEMS.

Pneumatic Side Action Grips - Specimen Holding Device

Instron’s pneumatic side-action grips feature optional specimen holding devices that allow an operator to close the grips with their fingers out of the test space.

'The Complete Tribology Lab' - Universal Mechanical Tester (UMT) from Bruker Nano

Bruker's UMT Universal Mechanical Tester. The UMT is the "complete tribology lab" and provides macro, micro and nanoscale tests under real-world conditions. Talking to Bruker's Steve Shaffer and University of Sheffield's Mark Rainforth, they discuss the ease of use and the typical applications of the UMT.

Microtrac MRB Company Video - Solutions in Particle Sizing

Microtrac MRB's core competence is to combine innovative particle characterization technology with maximum operating convenience.

A Video to Show the FOUNDRY-MASTER Pro2

This video details the capabilities of Hitachi High-Tech Analytical Science's FOUNDRY-Master Pro2.

The SpectroVISC Q3000 Kinematic Viscometer from Spectro Inc

Dan Walsh from Spectro Inc shows us the main features and demonstrates just how fast and easy the Spectro VISC Q3000 portable kinematic viscometer is to use. It is extremely small and can be easily taken on-site to provide on the spot viscosity readings, producing results in a matter of seconds.

Operating The BetterPyc 380 to Measure Density

In this video tutorial, we brought you a comprehensive guide on how to use the BetterPyc 380 to measure the Density of materials with utmost ease.

Video to Show the Industrial and EV Composite Solutions

This video demonstrates the industrial and EV composite solutions provided by TRB Lightweight Structures.

Optical Dilatometry Platform - ODP860 Series

Scalable and field-upgradeable, the ODP 868 can be configured to operate in any combination of heating microscope, True Differential™ horizontal or vertical dilatometer, fleximeter or True Differential™ fleximeter modes.

Video to Show a QuickTest Using the BlueHill Universal

This video demonstrates a QuickTest using the BlueHill Universal from Instron.

Niton Handheld XRF Analyzers

This video presents the Niton family of handheld XRF analyzers from Thermo Fisher Scientific. It helps viewers understand what handheld XRF analysis can do for businesses, and why Niton analyzers are the right choice to help them do it.

Universal Testing Systems Video - 6800 Series

The 6800 Series universal testing systems range in capacity from 500 N to 50 kN and provide exceptional performance with unparalleled accuracy and reliability.

ProSpeed laser sensors – Measure length and speed in production processes without contact

The next generation optical speed and length sensor ProSpeed LSV-2100 is designed to reliably perform even under harsh conditions and with up to 3 meters stand-off distances

Paul Meijering Stainless Steel - A Customer Story from Hitachi High-Tech Analytical Science

This video details the customer story of Paul Meijering Stainless Steel with Hitachi High-Tech Analytical Science.

Company Video for LOMA Inspection Systems

Company video for LOMA Inspection Systems for the food, pharmaceutical and packaging industry.

Video to Show Food Inspection with X-Ray Detection - X5

Loma's X5 X-ray inspection systems for scanning of food products within production lines help manufacturers ensure safety and quality.

MEMS Applications and Systems

MEMS Applications and Systems: Enabling the next generation of industrial and consumer products Combining silicon-based microelectronics with micromachining technology, MEMS techniques and microsystem-based devices can potentially affect our lives and the way we live in a most positive way.

CAMSIZER X2 - Product Video

The quality control of fine powders can be substantially improved with the new CAMSIZER X2: More precise and faster analysis of particle size and particle shape helps to improve the product quality, reduce rejects and save labor costs, energy and raw materials.

Galaxy Grinding Discs for Materialographic Sample Preparation

The ATM Galaxy system consists of different grinding discs for materialographic sample preparation. All steps are “in tune” with each other.

Tim Drake - Aspex Corp - ASPEX EXpress Desktop - Pittcon 2012

Tim Drake from Aspex Corp at Pittcon 2012.

Introducing the ASPEX EXpress Desktop SEM: When size and budgets are key, the ASPEX EXpress desktop SEM provides superior particle analysis capabilities at an affordable price. Designed for "out of the lab" applications, the ASPEX EXpress desktop has plenty of power to do routine automated particle analysis with ease, speed and reliability.

A Video to Show the Next Level Optical Emission Spectrometer - FM EXPERT

The FM EXPERT is the next level optical emission spectrometer, combining superior analytical performance with a compact size, and low level nitrogen analysis.

A Complete Range of Spark Spectrometers for Process Control

This video details the complete range of Hitachi High-Tech Analytical Science's spark spectrometers for process control.

Powering Innovations At Pittcon 2013

Are you interested in the latest research and developments in laboratory science? Attend Pittcon 2013 for access to over 2,000 technical presentations, exhibitors from over 30 countries, short courses to enhance your professional development and unique networking opportunities with your colleagues.

The Spinsolve Carbon benchtop NMR spectrometer - for every chemistry lab from Magritek

The Spinsolve® series of high-performance, low-cost benchtop NMR spectrometers the Spinsolve® Carbon is perfect for Chemistry Education, Synthetic Chemists and Reaction Monitoring.

AUTOSAMPLER for CAMSIZER P4 - RETSCH TECHNOLOGY - Short Introduction

Whenever varying sample materials are to be analyzed or repeat measurements need to be carried out, the AutoSampler adapts perfectly to the defined measuring routine.

Video to Show the Capabilities of the TAM Air Isothermal Calorimeter

Delivering the performance, reliability, and ease-of-use that is the hallmark of TA Instruments products, the new TAM Air maintains its leadership position as the instrument of choice for cement and concrete hydration analysis using ASTM C1702 and C1679, as well as a powerful isothermal calorimeter for use in a wide range of emerging applications.

Aqualog System from HORIBA

This video from HORIBA shows the Aqualog system from HORIBA that is specifically designed to provide concurrent absorbance and fluorescence excitation and emission matrices (EEMS).

Vacuum Furnace HTK 600 GR - CARBOLITE GERO

The vacuum furnace HTK GR is a graphite furnace which operates with rough/fine vacuum, protective gases such as Nitrogen/Argon, and reactive gases like Hydrogen and Carbon Monoxide.

Wide Band Gap Power Semiconductor Device Fabrication

Increasing adoption of renewable energy sources & ever nearer prospect of electric vehicles drives demand for power semiconductor components.

Sulfur in Fuel Analysis to ASTM D4294, ISO8754 and IP336 - A Video of the X-MET8000

This video deomnstrates how the X-MET800 can be used for sulfur in fuel analysis to ASTM D4294, ISO8754 and IP336.

ZSX Primus Series of wavelength dispersive X-Ray fluorescence spectrometers from Rigaku

The ZSX Primus Series of wavelength dispersive X-Ray fluorescence spectrometers from Rigaku continues the tradition of delivering accurate results in both a timely and seamless manner, with unsurpassed reliability, flexibility, and ease of use to meet any challenges in the lab.

Video to Show Composite Rail Solutions Provided by TRB Lightweight Structures

This video shows the composite rail solutions TRB Lightweight Structures has to offer.

The Most Powerful Dynamic Mechanical Analysis - Discovery DMA 850

TA Instruments invites you to experience the ultimate in Dynamic Mechanical Analyzers, the Discovery DMA 850.

OpenPlex for Molecular Interaction Analysis from HORIBA

This video shows how to get easy multiplex molecular interactions investigations with the help of OpenPlex from HORIBA Scientific.

Video to Show Bruker Life Sciences Mass Spectrometry' timsTOF Pro

The timsTOF Pro with PASEF technology delivers revolutionary improvements in scan speed, coupled with enhanced specificity and high sensitivity.

ATM - Machines and Equipment for the Materialographic Laboratory - Made in Germany

Whatever you need for quality testing and material analysis, ATM has it all: As a manufacturer of high-quality machines for materialography (metallography), we offer the most comprehensive solution for your needs.

AZo.TV Interviews Dr Jan Stefan Roell and Bill Becker from Zwick-Roell at testXpo 2012 in Ulm Germany

AZo.TV Interviews Dr. Jan Stefan Roell and Bill Becker from Zwick-Roell at the 21st Annual TextXpo 2012, in Ulm, Germany

Pneumatic Side Action Grips - Flow Control

Instron’s pneumatic side-action grips feature an adjustable flow-control valve that can be used to slow down the closing speed and help prevent accidents.

A Video Introduction to X-Ray Fluorescence (XRF)

This video from Hitachi High-Tech Analytical Science explains Optical Emission Spectroscopy.

Filter Change of the AD Access - Video

This video shows a filter change of the AD Access.

Video Introduction to Dilatometry

TA Instruments provides the widest range of high precision dilatometers for the measurement of thermal expansion, sintering, phase transitions, and more.

DIM and PULSE options for the NIGHTSEA Stereo Microscope Fluorescence Adapter

The standard Model SFA Stereo Microscope Fluorescence Adapter has a simple ON/OFF switch. This is adequate for most customers, who want the maximum excitation intensity so that they see maximum fluorescence from their samples.

CARBOLITE GERO Semi-Automatic Furnace HTK 8 GR 22

The vacuum furnace HTK GR is a graphite furnace which operates with rough/fine vacuum, protective gases such as Nitrogen/Argon, and reactive gases like Hydrogen and Carbon Monoxide.

Did You Know? Oxford Instruments Plasma Technology

Did you know we could etch the entire London transport network onto a human hair? Or that our plasmas are hotter than the surface of the sun?

Advanced Sharing, Data Management and Storage for X-MET, Vulcan and LAB-X

ExTOPE connect is an advanced data management and storage service that allows you to store your results safely, share data instantly and access the data in real time from any computer.

Laser Welding with 500 Watts - Video

This video shows laser welding with 500 watts

Variable Speed AC Motor Drive Development and Implementation

The Variable Speed AC Motor Drive Development and Implementation with the Yokogawa DL850 ScopeCorder.

VLOG: Optical 3D measurement of cutting tools

In our 5th Vlog Urban Muraus and Sandra Bergmann are discussing how Bruker Alicona is solving different measurement tasks on cutting tools. Learn more about edge preparation, surface finish and the overall geometry. ��Learn more about: http://www.alicona.com https://www.alicona.com/products/edge... https://www.alicona.com/products/edge...

Video to Demonstate ITC Automation with Affinity ITC

ITC automation can lead to bent syringes and imperfect data, however, TA Instruments has perfected it with the all new Affinity ITC!

Revolutionising Energy Storage and Conversion

Embark on an exciting journey with Malvern Panalytical as they work on revolutionising energy storage and conversion with the Kumta Lab at the University of Pittsburgh.

Filter Change of the DP Universal - Video

This video shows a filter change of the DP Universal.

Axial Depth Profile of Multlayer Polymer Films Using Confocal Raman Spectroscopy

This video from Horiba shows the presentation and analysis of spectra obtained by Confocal Raman spectroscopy to create an axial depth profile of multlayer polymer films.

Handheld XRF analyser X-MET8000 for quality control and assurance

Used by thousands of businesses around the world, the X-MET8000 handheld X-ray fluorescence (HHXRF) analyser delivers the performance needed for rapid alloy grade identification and accurate chemistry. It’s practical, rugged and easy to use to deliver results you can trust.

Vibration Isolation - Transmissibility Curve Explained

This video presents transmissibility curves that compare the performance of top-tier air tables with the typical performance of Minus K isolators adjusted to 1/2 Hz.

Webinar on Effortless Evaluation of Emulsion Behavior from HORIBA

This video from HORIBA gives a presentation on effortless evaluation of emulsion behavior, which is usually ascertained by the size of the droplet.

Sample Divider PT 100 - RETSCH

The Sample Divider PT 100 divides the sample so exactly that the composition of each fraction of the sample corresponds exactly to that of the original bulk sample.

Handheld LIBS Analyser for Scrap Metal Analysis

Vulcan is one of the fastest metals analysers that is built to last.

Pneumatic Side Action Grips - Jaw Face Shields

Instron’s pneumatic sifde-action grips can be equipped with jaw face shields that allow a specimen to be inserted but prevent finger picnhes.

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.