Master Bond offer the widest selection of compounds — over 3000 grades to meet your needs. Job proven for more than 30 years by major worldwide manufacturing companies, Master Bond products are presently employed in industries ranging from aerospace, optical and electronics to oil/chemical processing, medical and automotive. In fact, special grades are UL, USP Class VI and NASA approved. Often Master Bond adhesives are the most crucial part of the assembly process.
.jpg)
Increasing Productivity with Specialized Adhesive Bonding Systems
Master Bond's line of formulations consists of epoxies, polyurethanes, silicones, acrylics, cyanoacrylates and UV cures. They are designed to speed productivity, reduce waste, save energy and enhance product capabilities. They are available in small to large quantities and are freshly prepared to ensure maximum shelf life. We even have replacements for competitors discontinued products. If you have any unusual specifications, Master Bond will custom design an adhesive system to meet your requirements. When making your adhesive selection, you can depend on Master Bond.
.jpg)
Master Bond Adhesive Bonding Products
The following table summarizes Master Bond's range of adhesive bonding products.
|
Product
|
Description
|
|
X17
|
Single part, room temperature curing system for bonding polyolefins without surface preparation.
|
|
EP21TDC
|
Two part, toughened, room temperature curing epoxy that is ideal for bonding dissimilar substrates. Offers both high peel and shear strength properties.
|
|
SUPREME 10AOHT
|
One part thermally conductive epoxy requiring oven curing. Offers excellent strength, temperature resistance & heat transfer properties.
|
|
EP21ND
|
Non-drip, easy to use, general purpose two part epoxy adhesive and sealant. Rigidity and flexibility can be altered by varying the mix ratio.
|
|
EP30P
|
Specialty two part epoxy with wide applicability for bonding, sealing & coating of plastics such as acrylics and polycarbonates.
|
|
SUPREME 3HTND-2
|
Rapid curing, one part, no mix epoxy. Requires elevated temperature cure of 250-300°F. Ideal for bonding dissimilar substrates. Will not flow when cured.
|
|
UV18S
|
UV curable system with superior resistance to chemicals, particularly solvents. Cures rapidly at room temperature upon exposure to UV light.
|
|
MASTERSIL 410
|
Non-flowable, silicone adhesive/sealant with an elongation of over 500%. Superior electrical insulation properties. Superb water resistance. Cures at ambient temperatures.
|
Typical Applications for Master Bond Adhesive Bonding Systems
Typical applications of Master Bond's range of products for adhesive bonding products include:
- Lenses & Prisms
- Steering Systems
- IC Packaging
- OLED's
- Connector Sealing
- Composites
- Wave Guides
- Voltage Regulators
- Catheters
- Imaging Systems
- Alternators
- Respiratory Products
- Solar Panels
- Engine Cooling Systems
- Transducers
- Antennas
- Down Hole Pumps
- Tubing Assemblies
- Heat Transfer Devices
- Endoscopes
- Power Generators
- Honeycomb Parts Printers
- Door Panels
- Hearing Aids
- Ovens
- Displays
- Ophthalmic Instruments
- Washing Machines
- Electronic Controllers
- Orthopedic Devices
- Mobile Phones
- Instruments
- Surgical Instruments
- Drills
- Fuel Management Systems
- Filters Cameras
- Engines
|
- Pumps
- Ovens
- Motors
- Compressors
- Brake Systems
- PC Boards
- Lasers
- Controllers
- Heat Sinks
- Fiber Optics
- Hydraulic Components
- Sensors Lenses & Prisms
- Steering Systems
- IC Packaging
- OLED's
- Connector Sealing
- Composites
- Wave Guides
- Voltage Regulators
- Catheters
- Imaging Systems
- Alternators
- Respiratory Products
- Solar Panels
- Engine Cooling Systems
- Transducers
- Antennas
- Down Hole Pumps
- Tubing Assemblies
- Heat Transfer Devices
- Endoscopes
- Power Generators
- Honeycomb Parts
- Structural Panels
- Harness Assemblies
- Railcars
|
Important Adhesive Performance Requirements
Master Bond adhesives are designed to meet specific performance requirements. Among the most important are:
- Abrasion resistance
- Chemically resistance
- Cryogenically serviceable
- Easily polished
- Easily removed by water
- Easily repairable
- Electrically insulative
- Excellent adhesion
- Mechanical properties
- Optical transmission
- High temperature resistance
- Index of refraction
- Low coefficient of expansion
- Low outgassing
- Dimensionally stability
|
- Reworkable
- Low shrinkage
- Low stress
- Shock resistance
- Non-yellowing
- Resistance to water
- Impact resistance
- Screen printable
- Spectral transmittance
- Peel strength
- Durability
- Thermal cycling
- Shock resistance
- Thermal conductivity
- Vibration resistance
|
Performance Properties of Master Bond Adhesive Bonding Systems
Specific Master Bond range of adhesive bonding products offers resistance to:
- Water
- Acetone
- Toluene
- MEK
- Mineral Spirits
- Isopropanol
- Xylene
|
- Bleach
- Steris
- Cydex
- Skydrol
- Methanol
- Ethanol
- Gasoline
|
- Butylacetate
- Potassium Hydroxide
- 10% Hydrofluoric Acid
- 96% Sulfuric Acid
- 10% Nitric Acid
- 50% Sodium Hydroxide
- 35% Ammonium Hydroxide
|
Plastics that can be Bonded with Master Bond Adhesive Bonding Products
Within Master Bond's range of adhesive bonding products, there are grades that can bond plastics such as:
- ABS
- Acetal
- Arcylic
- ASA
- Epoxy
- Eva
- FEP, PFA
- Fiberglass
- Kevlar
- Peek
- Phenolic, Polyester Dap
- PMMA
- Polyamide (Nylon)
- Polybutylene Terephthalate (Valox)
- Polycarbonate
|
- Polyester (LCP)
- Polyester (PBT)
- Polyester (PET)
- Polyester, thermoset
- Polyetherimide (Ultem)
- Polyethersulfone
- Polyimide
- Polypropylene
- Polystyrene
- Polyurethane
- PPO
- PPS
- PTFE
- PVC
- San
|
Metals that can be Bonded with Master Bond Adhesive Bonding Products
Master Bond produces adhesive bonding products that can be used to bond metals including:
- Aluminum & Alloys
- Anodized Aluminum
- Beryllium
- Brass
- Bronze
- Cadmium
- Carbide
- Cast Iron
- Chromium
- Copper & Alloys
- Galvanized Steel
- Germanium
- Gold
- Incoloy
- Inconel
|
- Kovar
- Lead
- Magnesium & Alloys
- Molybdenum
- Nickel
- Nitenol
- Platinum
- Silver
- Solders
- Steel (Mild & Carbon)
- Steel (Stainless)
- Tin
- Titanium & Alloys
- Tungsten & Alloys
- Zinc & Alloys
|
Rubbers that can be Bonded with Master Bond Adhesive Bonding Products
There are also Master Bond adhesive bonding products that can be used to bond rubbers and elastomers such as:
- Butyl
- Chloroprene
- Ethylene Propylene
- Fluorocarbon
- Halogenated Butyl
- Latex
- Natural
- Neoprene
|
- Polyacrylate
- Polychloroprene
- Polysioprene
- Polysulfide
- Santoprene
- Silicone
- Styrene-Butadiene
- Styrenic TPE
|
Specialty Substrates that can be Bonded with Master Bond Adhesive Bonding Products
Master Bond range of adhesive bonding products can also be used to bond:
- Polyolefins, including Polyethylene and Polypropylene among others
Other Materials that Master Bond Adhesive Bonding Products can Bond
Master Bond also manufactures adhesive bonding products that can bond materials such as:
.jpg)
This information has been sourced, reviewed and adapted from materials provided by Master Bond Inc.
For more information on this source, please visit Master Bond Inc.