Polyurethane - Hard Microcellular Elastomer

Aug 16 2001

Advantages

Lowest cost/tonne, best machining and bonding characteristics compared with other thermosetting polyurethane’s.

Disadvantages

Worst wear characteristics and low maximum operating temperature and surface hardness compared with other thermosetting polyurethane’s.

Typical Properties

Property

Value

Density  (g/cm3)

0.9

Surface Hardness

SA50

Tensile Strength (MPa)

4

Flexural Modulus (GPa)

0.01

Notched Izod (kJ/m)

1.06+

Linear Expansion (/°C x 10-5)

13

Elongation at Break (%)

120

Strain at Yield (%)

N/Y

Max. Operating Temp. (°C)

70

Water Absorption (%)

10

Oxygen Index (%)

24

Flammability UL94

HB

Volume Resistivity (log ohm.cm)

12

Dielectric Strength (MV/m)

16

Dissipation Factor1kHz

0.003

Dielectric Constant  1kHz

4

HDT @ 0.45 MPa (°C)

20-

HDT @ 1.80 MPa (°C)

20-

Material Drying  hrs @ °C

NA

Melting Temp. Range (°C)

NA

Mould Shrinkage (%)

1.7

Mould Temp. Range (°C)

NA

Applications

Shoe soles, car bumpers, tyres, wheels, gears, and fuel hose.

 

Source : Abstracted from Plascams

For more information on Plascams please visit The Rubber and Plastics Research Association

 

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
(Logout)
Your comment type
Submit

Sponsored Content

Editorial Highlights

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

Newsletters you may be interested in

See all Newsletters »

Terms

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

Provide Feedback