Polyethylene Terephthalate - PET 36% Glass Fibre Reinforced

Sep 4 2001

Polymer Type

Thermoplastic

Advantages

Good combination of heat resistance, creep resistance, tensile strength, high modulus and low warpage accompanied by good moulding tolerances compared with unmodified PET.

Disadvantages

Low elongation at break compared with unmodified PET. Mouldings can be anisotropic.

Typical Properties

Property

Value

Density (g/cm3)

1.63

Surface Hardness

RM100

Tensile Strength (MPa)

185

Flexural Modulus (GPa)

12

Notched Izod (kJ/m)

0.11

Linear Expansion  (/°C x 10-5)

2

Elongation at Break (%)

3

Strain at Yield (%)

N/A

Max. Operating Temp. (°C)

140

Water Absorption (%)

0.06

Oxygen Index (%)

20

Flammability UL94

HB

Volume Resistivity (log ohm.cm)

16

Dielectric Strength (MV/m)

50

Dissipation Factor 1kHz

0.006

Dielectric Constant  1kHz

4

HDT @ 0.45 MPa (°C)

240

HDT @ 1.80 MPa (°C)

225

Material. Drying  hrs @ (°C)

2 @130

Melting Temp. Range (°C)

270 - 295

Mould Shrinkage (%)

0.5

Mould Temp. Range (°C)

90 - 110

Applications

Exterior body parts, structural supports, casings and housings, electrical components.

 

Source : Abstracted from Plascams

For more information on Plascams please visit RAPRA Technology Ltd.

 

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
(Logout)
Your comment type
Submit

Sponsored Content

Editorial Highlights

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

Newsletters you may be interested in

See all Newsletters »

Terms

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

Provide Feedback