Plasticised Polyvinyl Chloride - Plasticised PVC - PPVC (100 - 300%) Elongation

Sep 7 2001

Polymer Type

Thermoplastic

Advantages

Soft and flexible, better flammability characteristics, tensile strength and modulus than PVCs with higher levels of plasticisation.

Disadvantages

Lower tensile strength and modulus than PVCs with lower levels of plasticisation.

Typical Properties

Property

Value

Density (g/cm3)

1.3

Surface Hardness

SA65

Tensile Strength (MPa)

14

Flexural Modulus (GPa)

0.007

Notched Izod (kJ/m)

1.06+

Linear Expansion  (/°C x 10-5)

14

Elongation at Break (%)

280

Strain at Yield (%)

N/Y

Max. Operating Temp. (°C)

50

Water Absorption (%)

0.3

Oxygen Index (%)

22

Flammability UL94

HB

Volume Resistivity (log ohm.cm)

13

Dielectric Strength (MV/m)

30

Dissipation Factor 1kHz

0.1

Dielectric Constant  1kHz

6

HDT @ 0.45 MPa (°C)

20-

HDT @ 1.80 MPa (°C)

20-

Material. Drying  hrs @ (°C)

NA

Melting Temp. Range (°C)

170 - 190

Mould Shrinkage (%)

1.5

Mould Temp. Range (°C)

20 -  40

Applications

Cable sheathing, terminal shrouds, gaskets, visors, automotive lamp holders, grommets, handgrips, electric plug covers, Wellington boots and gloves.

 

Source : Abstracted from Plascams

For more information on Plascams please visit RAPRA Technology Ltd.

 

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
(Logout)
Your comment type
Submit

Sponsored Content

Editorial Highlights

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

Newsletters you may be interested in

See all Newsletters »

Terms

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

Provide Feedback