Latest Articles

RSS

Membranes Made from Carbon Nanotubes Could Allow Fluid Flow Rates Faster Than Theory Would Predict

Membranes composed of man-made carbon nanotubes permit a fluid flow nearly 10,000 to 100,000 times faster than conventional fluid flow theory would predict because of the nanotubes’ nearly friction-free surface according to University of Kentucky researchers. Posted November 3 2005

14 Nov 2005

Machined Zirconia Component From Insaco Solves Wire Cutter Problem For Cresent Design

Insaco's machined zirconia component for wire cutters eliminated wear, downtime, and waste, impressing users with its durability.

From INSACO Inc. - Machining of Hard Materials 19 Oct 2021

Fused Silica - NASA Turns To the Precision Ceramic Machining Expertise of Insaco

NASA turned to Insaco's expertise in fabricating a solar concentrator from a special grade of fused silica with extremely tight tolerances.

9 Nov 2005

Hard Materials Versus Metals - Maintenance And Cost Benefits

Insaco specializes in precision machining of hard materials like sapphire and ceramics, offering superior alternatives to metals for enhanced performance.

From INSACO Inc. - Machining of Hard Materials 20 Sep 2021

Amorphous Carbon Thin Films Prepared by Electron-Gun Evaporation

Physical properties of amorphous carbon (a-C) thin films prepared by electron-gun evaporation on glass substrates have been studied. The electron gun method is a simple alternative technique to prepare films of this material, in vacuum or in controlled atmospheres like N2, with important physical pr

9 Nov 2005

Surface Azimuthal Anchoring Energy Between The Trapezoid Grating Surface And Nematic Liquid Crystal Layer Studied By Finite Element Method

Zenithal bistable displays (ZBD) are attracting attention for small electronic devices. ZBD devices based on surface relief grating alignment have demonstrated good image quality and memory capability. This article examines the accuracy of Berreman's topological alignment model.

8 Nov 2005

Structural and Chemical Composition of Si-Al Oxy-Nitride Coatings Produced by Reactive DC Magnetron Sputtering

Three main evaporation parameterss were controlled to produce Si-Al-O-N coatings: oxygen flux, nitrogen flux and substrate bias potential. These alterations allowed a diverse range of coatings with chemical composition ranging from Al2O3 and AlN to (Si,Al)O and (Si.Al)(O,N) phases were obtained.

7 Nov 2005

Electrochemical Lithium Insertion in Phoshpate Tungsten Bronzes of the Type Ax(PO2)4(WO3)8 with A = Na and K

An electrochemical study of the lithium insertion in phosphate tungsten bronzes through potentiostatic and galvanostatic experiments was carried out. Property results suggest that these bronzes only can be considered as a cathode in primary lithium batteries.

4 Nov 2005

Characterization of Electric Contact on P-Type SiC Semiconductors for Environmental Devices

Electrical characteristics of ohmic contacts on p-type 4H-SiC semiconductor substrates were studied for the environmental sensor applications. The results of the contact properties are strongly dependent on metal deposition conditions and post-annealing conditions.

25 Oct 2005

Triode Field-Emission Display Constructed by Ceramic Cold Emitter

A new type of triode field-emission display constructed by the ceramic cold emitter was designed and tested. The display had three electrodes, a ceramic cold emitter, extraction gate and accelerating electrode. It was successful in making the ceramic phosphor glow with intense luminescence.

25 Oct 2005

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

Membranes Made from Carbon Nanotubes Could Allow Fluid Flow Rates Faster Than Theory Would Predict

Machined Zirconia Component From Insaco Solves Wire Cutter Problem For Cresent Design

Fused Silica - NASA Turns To the Precision Ceramic Machining Expertise of Insaco

Hard Materials Versus Metals - Maintenance And Cost Benefits

Amorphous Carbon Thin Films Prepared by Electron-Gun Evaporation

Surface Azimuthal Anchoring Energy Between The Trapezoid Grating Surface And Nematic Liquid Crystal Layer Studied By Finite Element Method

Structural and Chemical Composition of Si-Al Oxy-Nitride Coatings Produced by Reactive DC Magnetron Sputtering

Electrochemical Lithium Insertion in Phoshpate Tungsten Bronzes of the Type Ax(PO2)4(WO3)8 with A = Na and K

Characterization of Electric Contact on P-Type SiC Semiconductors for Environmental Devices

Triode Field-Emission Display Constructed by Ceramic Cold Emitter

From Lab to Industry: How Additive Manufacturing is Transforming Structural Integrity

How do CT Instruments Help with Battery Analysis?

How Thermal Analysis Enhances Renewable Energy Systems

CSP Temperature Standards by Thermometrics

Coolant Control Module for Plasma Cleaning

Nano-Observer II: AFM for Nanoscale Imaging

Sponsored Content

Tabletop SEM Analysis of Cosmetics

Power Spectral Density: Understanding Surfaces at Different Scales

Complete Guide to 3D Printing

Advanced Imaging Meets AI: Transforming Thermal Barrier Coating Analysis with the Apreo ChemiSEM

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

From Lab to Industry: How Additive Manufacturing is Transforming Structural Integrity

How do CT Instruments Help with Battery Analysis?

How Thermal Analysis Enhances Renewable Energy Systems

1Accelerating Ion Transport with New Material

2YASA and Automobili Lamborghini Unveil Next-Generation High-Performance E-Propulsion Technology

3New Lithium Composite Promises Enhanced Safety and Lifespan

4A Novel Approach to Enhancing Thermophotovoltaic Efficiency

5A Self-Healing Plastic Ceramic Electrolyte for Lithium Metal Batteries

63D-Printing of High-Performance Plain Carbon Steel

Sponsored Content

Editorial Highlights