Biomaterials News

RSS

Rice Researchers Build Open-Source Laser Sintering Printer to Create Biomaterials

Bioengineers at Rice University have developed OpenSLS, an open-source, selective laser sintering platform, by altering a commercial-grade CO2 laser cutter.

24 Feb 2016

EU Trademark Approval Granted to Cortec's Biobased Rust Preventative, BioCorr

Cortec® Corporation proudly announces that its biobased and biodegradable rust preventative -BioCorr® has received registered trademark approval from EU's Office of Harmonization.

19 Feb 2016

Performance-Enhancing Fabric Developed by Integrating Textiles with Microorganisms

A new performance fabric, which actively responds to the wearers body temperature and perspiration levels, has been created by weaving a layer of bacteria over traditional fabric.

18 Feb 2016

OIST Scientists Develop Crystals from Surface-Acting Agents

The Okinawa Institute of Science and Technology Graduate University (OIST) aims to promote collaboration between a wide range of disciplines.

15 Feb 2016

Researchers Create Hydrogels to Halt Differentiation in Stem Cells

Stem cells are pluripotent, meaning they are capable of becoming any cell type. They have potential to be treatments for diseases such as leukemia, diabetes, and age-related blindness. The challenge is to be able to sustain this versatility until it is needed.

11 Feb 2016

Novel X-ray Method Provides Better Images of Imperfect Crystals of Biomolecules

Forming the high-quality crystals required for X-ray analysis of the structure of biological molecules is often the most difficult part of taking atomic-resolution images. Using the world's brightest X-ray source, at the Department of Energy's SLAC National Accelerator Laboratory, researchers have demonstrated that sharp images are obtainable, even with imperfect crystals.

11 Feb 2016

Engineers Discover Method to Convert Sugar into Biorenewable Nylon

Iowa State University engineers have discovered a method where sugar is efficiently converted into a new type of nylon, by integrating a genetically engineered yeast strain with an electrocatalyst.

11 Feb 2016

Researchers Report Superior Strength of Diatoms

Diatoms are algae organisms comprising a single cell, and are sized from 30 to 100 millionths of a meter in diameter. They are scattered all-over the oceans, and have a hard shell made of silica. This shell resembles a flattened and wide cylinder like that of a tambourine.

10 Feb 2016

Putnam’s New Super-Tri Tubing Technology Can Significantly Increase Tensile and Burst Strength, Reduce Elongation

Putnam Plastics Corporation, a leader in advanced extrusions and components for minimally invasive medical devices, has developed an advanced tri-layer tubing technology that significantly improves tensile and burst strength, while reducing elongation. Super-Tri™ tubing is made with a proprietary extrusion process and aids in the prevention of wire lock-up in catheters where guidewires are used.

9 Feb 2016

Cyfuse Biomedical’s 3D Bioprinter and Cell Applications’ Primary Cells Help Make Scaffold-Free 3D Tissues

Advanced tissue-engineering services now exist in North America, according to Cell Applications, Inc. and Cyfuse Biomedical K.K. These services have been made available due to the development of a novel three-dimensional (3D) bioprinting method known as the “Kenzan Method.”

5 Feb 2016

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Biomaterials News

Rice Researchers Build Open-Source Laser Sintering Printer to Create Biomaterials

EU Trademark Approval Granted to Cortec's Biobased Rust Preventative, BioCorr

Performance-Enhancing Fabric Developed by Integrating Textiles with Microorganisms

OIST Scientists Develop Crystals from Surface-Acting Agents

Researchers Create Hydrogels to Halt Differentiation in Stem Cells

Novel X-ray Method Provides Better Images of Imperfect Crystals of Biomolecules

Engineers Discover Method to Convert Sugar into Biorenewable Nylon

Researchers Report Superior Strength of Diatoms

Putnam’s New Super-Tri Tubing Technology Can Significantly Increase Tensile and Burst Strength, Reduce Elongation

Cyfuse Biomedical’s 3D Bioprinter and Cell Applications’ Primary Cells Help Make Scaffold-Free 3D Tissues

The Future of XRF Technology with Revontium

Unlocking the Secrets of Isothermal Desorption Spectroscopy

Recycling Insights: Extracting Valuable Recyclates from Electronic Waste

SightBase® SaaS Imaging Platform

Thermo Scientific™ ARL™ X900 XRF Spectrometer

Transforming AFM Systems with the Galaxy Dual Controller

Sponsored Content

What is the Future of Viscosity Testing?

How Tapes are Transforming Robotic Applications

Surface Analysis of Zebrafish Using COXEM’s EM-40 Tabletop SEM: A Detailed Examination of Microstructure and Composition

FT-NIR Analysis of Oil Content in Soapstock and Spent Bleaching Earth

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Biomaterials News

The Future of XRF Technology with Revontium

Unlocking the Secrets of Isothermal Desorption Spectroscopy

Recycling Insights: Extracting Valuable Recyclates from Electronic Waste

1A Novel Method for Accurate SoC Estimation in LiFePO4 Batteries

2Flexible Thermoelectric Fibers for Wearable Tech Developed

3A New Approach to Parachute Design

4Rockwell Automation Provides Integrated Technology For PFi’s World-First Australian-Made Solution For Wastewater Treatment By Major Beverages Company

5ZnO and CuO Nanoparticles for Enhanced Heat and Corrosion-Resistance of Paints

6A project will produce polyolefin-coated fabrics as an alternative to PVC to make bags for transporting fresh water by sea

Sponsored Content

Editorial Highlights