Latest Articles

RSS

Electrical Discharge Machining and Surface Alloying - The Process, Parameters and State of Play

Electrical Discharge Machining (EDM) is being seen as a novel technique for surface modification. How the process works, problems associated with it, electrode materials, wear and corrosion resistant coatings and surface alloying are covered.

16 Jul 2003

SuperCooler Heat Treatment Technology for Aerospace Components

SuperCooler technology was developed by Ladish. It uses compressed air carefully controled by computers to control cooling rates and reduce thermal stresses while optimising properties. The process and its advantages are outlined.

15 Jul 2003

Digital Capillary Rheometers from Bohlin Instruments - RH7-D and RH10-D

The RH7-D and RH10-D are rheometers from Bohlin Instruments that feature digital drives, Windows-based operating software and the ability to operate under high loading conditions. Posted June 2003

14 Jul 2003

Aberration Correction in Electron Microscopy – Enabling the Imaging of Oxygen Atoms in Perovskite Structures

Aberrations in microscopes limit their resolution. The ability to correct these aberrations will enable imaging down to the atomic level. Described herein is a device that corrects the aberration and has been used to image oxygen atoms in a perovskite structure.

14 Jul 2003

Structural Integrity Monitoring of Bridges, Offshore Structures, Ships, Industrial Plants etc ( SIMoNET )

The importance of structural integrity is outlined and ways in which the condition of structures can be monitored are covered from the perspective of SIMoNET. Typical applicatioms such as bridges, ships and offshore platforms are briefly described.

14 Jul 2003

The Magnesium Sheet Casting Process – The Process, Properties, Economics, Advantages and Capabilities

With potential applications for magnesium increasing steadily due to an attractive set of properties, the demand for magnesium sheet is also increasing. Outlined is a process that has been developed for magnesium sheet manufacture. The technology, advantages and sheet properties are covered.

10 Jul 2003

AMC-SC1 A Magnesium Alloy Developed Specifically for Engine Blocks

AMC-SC1 is a magnesium alloy that was developed specifically for engine blocks. Reasons for its development and advantages for using magnesium in engine blocks are outlined.

10 Jul 2003

Titanium Alloys - Ti5Al1Sn1Zr1V0.8Mo Properties and Applications

Ti5Al1Sn1Zr1V0.8Mo is an alpha titanium alloy with intermediate strength. Compositions, designations, physical and mechanical properties, fabrication details and applications are covered.

10 Jul 2003

Dealing with Red Mud - By - Product of the Bayer Process for Refining Aluminium

Red mud is a by-product of bauxite processing via the Bayer process. Described herein is a process that converts the red mud into mineral products that can be used for commercial applications.

8 Jul 2003

Steel for Coal - Fired Power Station - Developing Better Steels Through Modelling

Trying to predict the performance of steel alloys for use in coal fired power stations is a complex problem. Computer modelling may hold the answer. Described in this article is a comprehensive model by researchers from Loughborough University.

7 Jul 2003

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

Electrical Discharge Machining and Surface Alloying - The Process, Parameters and State of Play

SuperCooler Heat Treatment Technology for Aerospace Components

Digital Capillary Rheometers from Bohlin Instruments - RH7-D and RH10-D

Aberration Correction in Electron Microscopy – Enabling the Imaging of Oxygen Atoms in Perovskite Structures

Structural Integrity Monitoring of Bridges, Offshore Structures, Ships, Industrial Plants etc ( SIMoNET )

The Magnesium Sheet Casting Process – The Process, Properties, Economics, Advantages and Capabilities

AMC-SC1 A Magnesium Alloy Developed Specifically for Engine Blocks

Titanium Alloys - Ti5Al1Sn1Zr1V0.8Mo Properties and Applications

Dealing with Red Mud - By - Product of the Bayer Process for Refining Aluminium

Steel for Coal - Fired Power Station - Developing Better Steels Through Modelling

Unlocking the Secrets of Isothermal Desorption Spectroscopy

Recycling Insights: Extracting Valuable Recyclates from Electronic Waste

How Plasma Will Revolutionize the Semiconductor Industry

SightBase® SaaS Imaging Platform

Thermo Scientific™ ARL™ X900 XRF Spectrometer

Transforming AFM Systems with the Galaxy Dual Controller

Sponsored Content

What is the Future of Viscosity Testing?

How Tapes are Transforming Robotic Applications

Surface Analysis of Zebrafish Using COXEM’s EM-40 Tabletop SEM: A Detailed Examination of Microstructure and Composition

FT-NIR Analysis of Oil Content in Soapstock and Spent Bleaching Earth

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

Unlocking the Secrets of Isothermal Desorption Spectroscopy

Recycling Insights: Extracting Valuable Recyclates from Electronic Waste

How Plasma Will Revolutionize the Semiconductor Industry

1A Novel Method for Accurate SoC Estimation in LiFePO4 Batteries

2Flexible Thermoelectric Fibers for Wearable Tech Developed

3A New Approach to Parachute Design

4Rockwell Automation Provides Integrated Technology For PFi’s World-First Australian-Made Solution For Wastewater Treatment By Major Beverages Company

5A project will produce polyolefin-coated fabrics as an alternative to PVC to make bags for transporting fresh water by sea

6ZnO and CuO Nanoparticles for Enhanced Heat and Corrosion-Resistance of Paints

Sponsored Content

Editorial Highlights