May 2 2013
Topics Covered
Introduction
Chemical Composition
Physical Properties
Mechanical Properties
Thermal Properties
Applications
Other Designations
Introduction
Magnesium is among the most abundantly available elements in the earth’s crust. It has a silvery-white appearance and is commonly alloyed with aluminum, zinc, lead and other non-ferrous metals. Magnesium AM100A-F alloy exhibits good weldability, tensile and yield strength and elongation. It is used in sand casting and permanent mold casting.
This datasheet looks into the properties and applications of magnesium AM100A-F alloy.
Chemical Composition
The table below provides data on the composition of the magnesium AM100A-F alloy.
Element |
Content (%) |
Magnesium, Mg |
90 |
Aluminum, Al |
9.3-10.7 |
Silicon, Si |
≤0.30 |
Zinc, Zn |
≤0.30 |
Manganese, Mn |
≤0.10 |
Copper, Cu |
≤0.10 |
Nickel, Ni |
≤0.010 |
Physical Properties
The physical properties of magnesium AM100A-F cast alloy are as per the table below.
Properties |
Metric |
Imperial |
Density |
1.83 g/cm³ |
0.0661 lb/in³ |
Melting point (incipient melting) |
≥430°C |
≥806°F |
Mechanical Properties
The mechanical properties of die cast magnesium AM100A-F alloy are given in the table below.
Properties |
Metric |
Imperial |
Tensile strength |
150 MPa |
21800 psi |
Yield strength (@strain 0.200) |
83 MPa |
12000 psi |
Compressive yield strength |
83 MPa |
12000 psi |
Shear modulus |
17 GPa |
2470 ksi |
Shear Strength |
125 MPa |
18100 psi |
Elastic modulus |
45 GPa |
6530 ksi |
Poisson's ratio |
0.35 |
0.35 |
Elongation at break (in 50 mm) |
2% |
2% |
Hardness, Brinell (500 kg load, 10 mm ball) |
53 |
53 |
Hardness, Rockwell E |
61 |
61 |
Hardness, Vickers |
68 |
68 |
Machinability |
100% |
100% |
Thermal Properties
The thermal properties of magnesium AM100A-F alloy are as per the table below:
Properties |
Metric |
Imperial |
Thermal expansion co-efficient (@ 0.000-100°C/32-212°F) |
25 µm/m°C |
13.9 µin/in°F |
Thermal Conductivity |
73 W/m K |
507 BTU-in/hr ft2 °F |
Applications
Magnesium AM100A-F alloy is mainly used in the making of sand casts and permanent molds.
Other Designations
Some of the other designations used to denote magnesium AM100A alloy are as below:-
-
ASTM B80
-
ASTM B 199
-
AMS 4455 T6 temper
-
ASTM B 403 (Ingot UNS M10101)
-
SAE J465
-
Old SAE 502