Materials Testing News

RSS

Demand for a Alternative Fuel Source Leads to an Increase in Ceram Landfill Gas Testing Services

Reflecting the current dominance of environmental issues on political and business agendas, demand for CERAM's range of landfill gas testing services has risen by over ten percent in the last twelve months. The s...

16 Oct 2007

CSMA Expertise in Coatings and Surface Analysis Ideally Suited to Aerospace Industry

CSMA, one of the world's leading surface analysis experts and member of both the Midlands Aerospace Alliance (MAA) and the North West Aerospace Alliance (NWAA), has developed a comprehensive range of services ideally...

16 Oct 2007

Nanoscale Titanium Dioxide Particles Help Protect Plastics from Sun Damage

DuPont today introduced DuPont(TM) Light Stabilizer 210, a product designed as sun protection for plastics. The product uses extremely small particles of titanium dioxide to efficiently absorb ultraviolet light, protecti...

16 Oct 2007

The Right Wall Material

ASDEX Upgrade at Max Planck Institute of Plasma Physics (IPP) in Garching, Germany, recently became the world's first and only device allowing experiments with a wall completely clad with metal, viz. tungsten. The re...

15 Oct 2007

Lockheed Martin Celebrated 40 years of Testing for the Automotive and Aircraft Industries

Lockheed Martin today celebrated 40 years of aircraft testing in its Low Speed Wind Tunnel (LSWT). On this date in 1967, the first aircraft test, a crew egress trial for the C-5A Galaxy, was conducted. As one of a handfu...

11 Oct 2007

Amedica's Silicon Nitride Ceramic Technologies Won the ISTA HAP Paul Award

Amedica Corporation, an orthopedic implants company focused on silicon nitride ceramic technologies, announced today that a paper it presented on the in-vitro testing and evaluation of its silicon nitride ceramic bearing...

11 Oct 2007

Outdoor Weathering Stations Being Set Up to Test Solar Modules

Solar modules must stand up to UV radiation, rain, snow and heat. To find out where their weak points lie, outdoor weathering stations are being set up at sites exposed to extreme climatic conditions: in the tropics, in ...

10 Oct 2007

Lafarge Inaugurate New Concrete Research Facility

Lafarge is today inaugurating a new technological building dedicated to innovation in concrete at its research center in L’Isle d’Abeau, near Lyons, the world’s largest building materials research facil...

4 Oct 2007

ExxonMobil Chemicals Introduce Polymer Modifiers for the Rubber Industry

Elevast™ polymer modifiers for the rubber industry were introduced today by ExxonMobil Chemical. These new specialty hydrocarbon fluids may enable formulators to create innovative solutions for EPDM and polyolefin ...

3 Oct 2007

First Handheld Radioactivity Detector for Terrorist Attacks Developed

Brad Jones, a professor of chemistry at Wake Forest University, is leading a team of researchers at four institutions to develop the first handheld, field instrument capable of detecting and identifying radioactive parti...

1 Oct 2007

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Materials Testing News

Demand for a Alternative Fuel Source Leads to an Increase in Ceram Landfill Gas Testing Services

CSMA Expertise in Coatings and Surface Analysis Ideally Suited to Aerospace Industry

Nanoscale Titanium Dioxide Particles Help Protect Plastics from Sun Damage

The Right Wall Material

Lockheed Martin Celebrated 40 years of Testing for the Automotive and Aircraft Industries

Amedica's Silicon Nitride Ceramic Technologies Won the ISTA HAP Paul Award

Outdoor Weathering Stations Being Set Up to Test Solar Modules

Lafarge Inaugurate New Concrete Research Facility

ExxonMobil Chemicals Introduce Polymer Modifiers for the Rubber Industry

First Handheld Radioactivity Detector for Terrorist Attacks Developed

How do CT Instruments Help with Battery Analysis?

How Thermal Analysis Enhances Renewable Energy Systems

Advancing Battery Science: PerkinElmer’s Role in Improving Chemistries and Recycling Efficiency

CSP Temperature Standards by Thermometrics

Coolant Control Module for Plasma Cleaning

Nano-Observer II: AFM for Nanoscale Imaging

Sponsored Content

The Role of Accurate Analysis in Sustaining Critical Materials for a Circular Economy

How to Address Thermal Runaway Protection (TRP) in EVs

Torque Testing Explained

Analysis of Nitrogen Solubility in Soy Protein Using FT-NIR Spectroscopy

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Materials Testing News

How do CT Instruments Help with Battery Analysis?

How Thermal Analysis Enhances Renewable Energy Systems

Advancing Battery Science: PerkinElmer’s Role in Improving Chemistries and Recycling Efficiency

1Accelerating Ion Transport with New Material

2New Catalyst Revolutionizes Hydrogen Peroxide Production

3The ECOFAP Project aims to make shoe soles and heels with a new 3D printing material based on tanned leather waste

4A Bio-Inspired Catalyst for Efficient Chemical Reactions

5Innovative Technology for Enhanced Concrete Construction

6Development and Evaluation of P-PPD for Enhanced Crude Oil Flow and Hydrate Mitigation

Sponsored Content

Editorial Highlights