Posted in | Materials Testing and Characterisation

Admet’s 90° Peel Test Set Up Using eP2 Controller

This video illustrates a 90° peel test set up with eP2 controller perfomed by Admet. The eXpert 7601 is clamped with the 90° peel strength fixture and the free end of the tape is held by one vise grip on the top crosshead. The average and maximum loads of the tape is measured using this test.

For accurate and repeatable testing, the eP2 controller features load and crosshead position inputs plus enhanced closed-loop servo capabilitites.

Run Time – 6:03min

ADMET eP2 Training: Running an ASTM D1876 T-Peel Adhesive Peel Test

Other Videos by this Supplier

Demonstration of ADMET eP2 Universal Testing Machine Controller by ADMET

Demonstration of ADMET eP2 Universal Testing Machine Controller by ADMET
Floating Roller Peel Test from ADMET

Floating Roller Peel Test from ADMET
Rope Tensile Strength Test Using Admet's eXpert 7603 Testing Machine

Rope Tensile Strength Test Using Admet's eXpert 7603 Testing Machine
Admet’s ASTM D882 Plastic Film Tensile Strength Test

Admet’s ASTM D882 Plastic Film Tensile Strength Test
ASTM D1894 Coefficient of Friction Test on Plastic

ASTM D1894 Coefficient of Friction Test on Plastic
Admet’s ASTM D1876 T-Peel Adhesive Peel Test

Admet’s ASTM D1876 T-Peel Adhesive Peel Test

Demonstration of Admet’s ASTM D1876 T-Peel Adhesive Peel Test

Demonstration of Admet’s ASTM D1876 T-Peel Adhesive Peel Test

Admet’s Adhesive Lap Joint Shear Strength Test

Admet’s Adhesive Lap Joint Shear Strength Test
Admet’s ASTM D1894 Coefficient of Friction Test

Admet’s ASTM D1894 Coefficient of Friction Test
Webbing Tensile Test Using Admet’s eXpert 2655 Testing Machine

Webbing Tensile Test Using Admet’s eXpert 2655 Testing Machine
How to Perform a Thread Tensile Test Using ASTM D2256

How to Perform a Thread Tensile Test Using ASTM D2256
eXpert 7601 Universal Testing Machine from ADMET

eXpert 7601 Universal Testing Machine from ADMET
Puncture Strength Test on a Dual-Column Universal Testing Machine

Puncture Strength Test on a Dual-Column Universal Testing Machine
ISO 37 Elastomer Tensile Strength and Elongation Test

ISO 37 Elastomer Tensile Strength and Elongation Test
ISO 34 Elastomer Tear Strength Test

ISO 34 Elastomer Tear Strength Test
ADMET's eXpert 3900 System for Urethane Foam Constant Force Pounding Test

ADMET's eXpert 3900 System for Urethane Foam Constant Force Pounding Test
Viscoelastic Foam Recovery Time Test Using ADMET's eXpert 3900 System

Viscoelastic Foam Recovery Time Test Using ADMET's eXpert 3900 System
Three-Point Bend Flexural Test on Plastics

Three-Point Bend Flexural Test on Plastics
ADMET eXpert 7601 Universal Testing Machine

ADMET eXpert 7601 Universal Testing Machine
eXpert 5600F Foam Testing System from ADMET

eXpert 5600F Foam Testing System from ADMET
ASTM D638 Plastic Tensile Strength Test

ASTM D638 Plastic Tensile Strength Test

Torsion Tester - ADMET 81T

Torsion Tester - ADMET 81T

ASTM C1609 Flexural Testing of Fiber-Reinforced Concrete Beams

ASTM C1609 Flexural Testing of Fiber-Reinforced Concrete Beams
ADMET eXpert 8602 Axial-Torsion Testing Machine

ADMET eXpert 8602 Axial-Torsion Testing Machine
ExPress Hydraulic Testing Machine from ADMET

ExPress Hydraulic Testing Machine from ADMET
eXpert 5900 Fatigue Tester from ADMET

eXpert 5900 Fatigue Tester from ADMET
Setting Up ADMET's MTESTQuattro Controller to Run ASTM E8

Setting Up ADMET's MTESTQuattro Controller to Run ASTM E8
eXpert 3910 40N Dynamic Testing System from Admet

eXpert 3910 40N Dynamic Testing System from Admet
ExPress 250kN Servo Hydraulic Testing Machine from Admet

ExPress 250kN Servo Hydraulic Testing Machine from Admet
eXpert 5952 Testing System from Admet

eXpert 5952 Testing System from Admet
ASTM D4833 Puncture Testing from Admet Test Systems

ASTM D4833 Puncture Testing from Admet Test Systems
ASTM F1306 Puncture Testing by ADMET

ASTM F1306 Puncture Testing by ADMET
ADMET eXpert 3933 Fatigue Testing System

ADMET eXpert 3933 Fatigue Testing System
Sponge Rubber Foam Compression Deflection Test from ADMET

Sponge Rubber Foam Compression Deflection Test from ADMET
Hysteresis Energy Loss of Foam - ASTM D3574 X6 from ADMET

Hysteresis Energy Loss of Foam - ASTM D3574 X6 from ADMET
Package Seal Strength Test-ASTM F88 from ADMET

Package Seal Strength Test-ASTM F88 from ADMET
ASTM C469 Concrete Compression Test from ADMET

ASTM C469 Concrete Compression Test from ADMET
Tension Test on eX5M Test Machine from ADMET

Tension Test on eX5M Test Machine from ADMET
Rigid Plastic Compression Testing ASTM D695 from ADMET

Rigid Plastic Compression Testing ASTM D695 from ADMET
Pneumatic Wedge Grips from ADMET

Pneumatic Wedge Grips from ADMET

Tell Us What You Think

Do you have a review, update or anything you would like to add to this video content?

Leave your feedback
(Logout)
Your comment type
Submit

Materials Videos by Subject Matter

Trending Stories

Terms

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

Provide Feedback