Search

Search Results
Results 8311 - 8320 of 14676 for High temperature
  • Using qNMR as Platform Methods of Oligonucleotides and Peptides
    Webinar - 18 Jun 2024
    In this webinar, Bruker details how to use qNMR as platform methods of oligonucleotides and peptides.
  • Cobalt - Based Carbide - Hardened Alloys - Nature and Properties
    Article - 13 Sep 2001
    Cobalt-based carbide-hardened alloys consist of approximately 40-70% Co and 20-30% Cr. They have excellent high temperarture creep resistance due to carbide strengthening mechanisms. Chromium provides...
  • Polyvinylidenedifluoride - PVDF
    Article - 10 Sep 2001
    PVDF posses the highest tensile strength of all processable fluorocarbons. Contains a general overview of the polymer Polyvinylidenedifluoride including relative advantages, disadvantages and...
  • Polymethylpentene - TPX
    Article - 10 Sep 2001
    TPX has a very low density (0.83g/cm3) and is transparent. Has a reasonably high continuous use temperature (approx. 75°C (170°F)) and may be autoclaved for sterilisation. Good high frequency...
  • Polysulphone - Psul
    Article - 5 Sep 2001
    Contains a general overview of the polymer Polysulphone including relative advantages, disadvantages and applications, together with a table of typical properties.
  • Polyethylene Terephthalate - PET 55% Glass Fibre Reinforced
    Article - 4 Sep 2001
    Improved tensile strength, maximum operating temperature and heat distortion temperature, accompanied by extremely high flexural modulus when compared to unmodified PET. Used for gears, sprockets,...
  • Voyager - Flexible PECVD Platform from Denton Vacuum
    Equipment
    The addition of the Voyager to Denton Vacuum's range of deposition platforms provides the thin film specialist with the ability to deposit a variety of films previously difficult to produce due to the...
  • Polyphenylene Oxide - Modified - PPO Structural Foam
    Article - 31 Aug 2001
    Exhibits good rigidity to weight ratio. However, surface swirl patterns produced so if high quality finish is required.
  • S-Glass Fibre
    Article - 30 Aug 2001
    S-Glass is a stiffer/stronger version of E-glass which is also used in polymer matrix composites. Improved mechanical properties result in incaresed cost. Hence it is generally used under more extreme...
  • Acetal Polyoxymethylene - POM
    Article - 30 Aug 2001
    Contains a general overview of the polymer Acetal Polyoxymethylene including relative advantages, disadvantages and applications, together with a table of typical properties.

Sponsored Content

Editorial Highlights

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

Terms

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

Provide Feedback